We provide a complete range of accessories for your waterjet. All accessories are designed to help you get the most from your waterjet.
A16+B:There are 2 intensifiers in the A16+B pump. These two intensifiers are able to work alternately, which makes the machine can run 24h*7d. It is because if one of these two intensifiers broken down, the machine can use the other intensifiers quickly without any wasting time on waiting for repairing the pump. it increases the working efficiency.
A16*2:There are 2 intensifiers in A16*2 pump. These 2 intensifiers work at the same time. During the process, the cutting speed will be increased by 30%-50%. Even though, the psi on the each intensifier dose not be changed(60000pis), in most application areas, the final cutting effects are comparable with the intensifier owning 96000pis. On the other side, Our A16*2 pump using the same quick-wear parts with regular waterjet parts, which greatly reduces the maintenance cost.
4-Axis: It can rotate around the Z-axis continuously with a 45°maximum inclination angle. The required angle with angle scale can easily be set up by customers on the cutting head. It largely improves the cutting effects like stone, ceramic and glass, which used as building material.
5-Axis: Equipped with the dedicated software, it has accomplished the 2D/3D cutting by offering tilt angles ranging from 0°to 45°. It can meet the requirements of arbitrary curved surface machining like the oblique, vertical, conical surface, surface rotating, surface circular, etc.
Cantilever Style Table: It has 3 sides open, which is easier for material handing with its solid mechanical structure.
Hydraulic Lifter: The machine can achieve the glass semi-automatic working, which reduces the broken rate during delivery and improves the working effect. It is widely used when processing the bulk glass or the easily broken stone.
High Frame Bridge Style Table: It is widely used for the special material, like the high 3D material or the thickness material. The height can be increased to 300mm.
Full Enclosed Cutting Table: The full enclosed cutting table effectively and largely reduces the noise. It also effectively avoids the water splashed out during processing, which supports a more comfortable working environment.
All Stainless-Steel Series Waterjet: Covered with stainless-steel on the whole body makes the waterjet more firm. It is more anticorrosion and effectively extends the life of waterjet
Z-axis Waterjet Cutting Head: Install one more cutting head on the beam. In this way, our productivity could increase substantially.
Oil Chiller: It is used for cooling hydraulic fluid, improving working condition, extending working hours and operating life.
New Auto Abrasive Delivery System: With the new design, the new auto abrasive delivery system allows operator to add abrasive even during the machine working. It avoids to stop working for adding abrasive, which largely increases the working efficiency and reduces the energy consumption during operation.
Water Deionization System: It can remove the impurity from water. It is very necessary if the water quality is not good enough. Using it can reduce the rate of equipment corrosion and extend the life of waterjet.
Sludge Removal System: Specifically designed to continuously remove spent garnet from the waterjet catcher tank. It is convenient to recycle abrasive and indirect saving cost greatly.
Dynamic Height Adjustment System: It is widely used during processing the uneven surface material to ensure the high cutting quality and protect cutting head from touching material.
Anticollision Sensor: Anticollision sensor can prevent unexpected collision. Using this one, we can give cutting head a better protection and reduce unexpected cost.